> For the complete documentation index, see [llms.txt](https://help.smvend.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.smvend.io/equipment-installation/pos-terminals/mypos/go2/initiate-payment-mode.md).

# Initiate payment mode

If you're using your Go2 myPOS terminal with the pulse SmVend controller, you must enable the `Initiate payment` mode on the terminal. Please follow these steps:

{% tabs %}
{% tab title="Step 1" %}
Connect the power cable to the terminal. The terminal will start charging.

<figure><img src="/files/svnbrdzb6t5dzzZJRE1e" alt="" width="188"><figcaption></figcaption></figure>
{% endtab %}

{% tab title="Step 2" %}
Hold the power button. Release the button after the sound signal. The terminal will power on.

<figure><img src="/files/JJnW1wwj5874KHeLruiI" alt="" width="188"><figcaption></figcaption></figure>
{% endtab %}

{% tab title="Step 3" %}
Once the terminal has powered up, the white screen with the message "myPOS helps my business grow" will appear. Press the `F2` button to open the `Settings Menu 1`.

<figure><img src="/files/IQm5cYdeDAEIB0ainM0G" alt="" width="375"><figcaption></figcaption></figure>
{% endtab %}

{% tab title="Step 4" %}
Press `6` (`Transactions config`) → Press `4` (`Initiate payment`) → Press `1` (`ON`).

<figure><img src="/files/KQWwkeymMt7oejugZuHk" alt="" width="563"><figcaption></figcaption></figure>
{% endtab %}

{% tab title="Step 5" %}
After these settings, the phrase "To pay press any key" will appear on the main screen.

<figure><img src="/files/FG2qrfsDgfAg1Ea5nLWR" alt="" width="188"><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}

That's it! To initiate the payment, a user can tap almost any button (except the power and cancel buttons). If you have any questions, contact our Support team at **<support@smvend.io>** or WhatsApp at **+371 28 701 129.**