ccTalk bill/coin acceptor

Below you can find the guide on how to connect the ccTalk bill/coin acceptor with the SmVend Smart Connector controller.

1. Connect the SmVend cable to a bill and coin acceptor Connect the SmVend cable to the corresponding slots on the bill acceptor and coin acceptor.

1. Connect the SmVend cable to the Micro-Fit connector Connect the other end of the SmVend cable to the Micro-Fit connector on the controller.

1. Connect red wires Connect both red wires to the “EN OUT” terminal on the controller.

1. Contact the SmVend team Contact the SmVend support team for the final controller setup. Technical support’s WhatsApp: [phone]