Sigma

This guide provides a comprehensive step-by-step process to set up the myPOS Sigma with the SmVend Controller. Whether you are a seasoned vending machine operator or new to the industry, this guide will help you seamlessly integrate these technologies, ensuring your vending machine is equipped to handle a variety of payment methods.

Step-by-step

1. Registration Register for the myPOS service by visiting myPOS Enrollment.

2. Add the terminal Add the terminal to your myPOS account using the serial number printed on the back of the terminal.

1. Gather Necessary Equipment Ensure you have the following equipment:

   • SmVend telemetry controller

   • SmVend - myPOS cable

   • myPOS Sigma POS terminal

2. Connect the Cable

   • Connect the SmVend - myPOS cable to the corresponding connectors on the POS terminal.

   • Connect the other end of the cable to the POS port on the SmVend controller.

1. Power Up Apply power to the SmVend controller. The myPOS Sigma terminal will start automatically.

2. Configure settings Enter the settings menu by pressing the volume + button twice, followed by the volume - button twice, located on the back of the terminal.

   When accessing the terminal settings for the first time, you will be prompted to set a password for future access.

3. Pairing By default, access to the status and navigation bars is limited. Change this by doing the following:

   1. Pair the myPOS Sigma with a vending machine.

   2. Enter the Settings menu of the device.

   3. Choose Pair device

   4. Choose RS-232A port.

4. Final setup with SmVend support Contact the SmVend support team for the final controller setup. In your request, indicate the currency you chose when activating the terminal. Technical support’s WhatsApp: [phone]