> For the complete documentation index, see [llms.txt](https://help.smvend.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.smvend.io/equipment-installation/coffee-machines/wmf.md).

# WMF

### Smart controller + 1500S/5000S

{% embed url="<https://drive.google.com/file/d/16CLmZWPR6BhE-YaoKX1NEB1kr6fP6D91/view?usp=sharing>" %}

#### Step-by-Step guide

1. Connect the original telemetry cable from WMF to the socket on the right side of the machine according to the scheme.

<figure><img src="/files/yPOkh58RuBKVTWDGdPTw" alt="" width="563"><figcaption></figcaption></figure>

<table data-header-hidden><thead><tr><th width="351"></th><th></th></tr></thead><tbody><tr><td><img src="/files/9mmAWwU1pO8VKTL7gcxm" alt="" data-size="original"></td><td><img src="/files/UH9aS08xfSqzofAXUyaO" alt="" data-size="original"></td></tr></tbody></table>

2. Connect WMF and SmVend cables as shown in the picture below.

<figure><img src="/files/bEo9V0OWookTJEtxRljC" alt="" width="375"><figcaption></figcaption></figure>

3. The second plug from the SmVend cable connects to the socket on the right side of the coffee machine.

<figure><img src="/files/0ADWoMdaIQWZXy011xBY" alt="" width="375"><figcaption></figcaption></figure>

4. Connect the black flat plug of the SmVend cable to the corresponding socket on the controller.

<figure><img src="/files/azjs3tx4Z1PHrjC6dGmz" alt=""><figcaption></figcaption></figure>

### How to connect the Smart controller to the WMF 2000s or WMF Presto?&#x20;

To connect your WMF 2000S or Presto coffee machine, please refer to the instructions in the Schaerer section under[ the Coffee Factory](/equipment-installation/coffee-machines/schaerer/coffee-factory-tchibo-coffea-touch.md) guidelines. These models have the same way of connection. <br>