EXE PH coin acceptor

Below are the cables you will need to proceed with the installation and the connection scheme.

To connect the EXE PH (Executive Price Holding) coin acceptor to the SmVend controller, please do the following steps:

1. Connect the Coin acceptor cable Connect the Coin acceptor cable (MFD 3x3M) to the coin acceptor for data exchange.

2. Connect the Machine cable Connect the Machine cable (MFD 3x3F) to your machine for data exchange.

1. Connect the Power supply +24V cable Connect the Power supply +24V (MFD 2x3F) cable to your machine to power up the controller.

1. Power up the coin acceptor Power up your coin acceptor using the machine's Coin acceptor power supply cable.

1. Configure your machine Configure your machine to work using the EXE PH (price holding) protocol.

2. Set the SmVend account product matrix Set the same product prices in the SmVend account product matrix as on the coin acceptor.

3. Contact the SmVend team Contact the SmVend support team for the final controller setup. Technical support’s WhatsApp: [phone]