# Mini

Whether you are a seasoned vending machine operator or new to the industry, this guide will help you seamlessly integrate the myPOS Mini terminal, ensuring your vending machine is equipped to handle payments.

### Step-by-step

1. **Registration**\
   Register for the myPOS service by visiting [myPOS Enrollment](https://www.mypos.com/en/enroll).

2. **Add the terminal**\
   Add the terminal to your myPOS account using the serial number printed on the back of the terminal.

<figure><img src="/files/UYjg20xPgSy7uuCqkbXx" alt="" width="188"><figcaption></figcaption></figure>

3. **Power up**\
   Turn on the terminal by holding the right button on the top of the terminal.

<figure><img src="/files/mul2hkofAYOGPRVob7t7" alt="" width="375"><figcaption></figcaption></figure>

4. **Configure the terminal**

{% embed url="<https://drive.google.com/file/d/1BctaBJO__fsR41m2YraOYecac79yKyh4/view?usp=sharing>" %}

{% tabs %}
{% tab title="Step 1" %}
Go to the `Settings menu 1` by pressing `F2`

<figure><img src="/files/WYpWOvp1T1lvC2LXH3fy" alt="" width="188"><figcaption></figcaption></figure>
{% endtab %}

{% tab title="Step 2" %}
Go to the `Settings menu 2` by pressing `F2` again

<figure><img src="/files/FE7NjjoTQZ745uY91pE9" alt="" width="188"><figcaption></figcaption></figure>
{% endtab %}

{% tab title="Step 3" %}
Go to the `Change profile` by pressing `6`&#x20;

<figure><img src="/files/uCmMPoiSg7l6RsMzlbT7" alt="" width="188"><figcaption></figcaption></figure>
{% endtab %}

{% tab title="Step 4" %}
Select `Cash register` by pressing `2` ; the terminal will be rebooted

<figure><img src="/files/8RO93pDAU1norhy5sx4s" alt="" width="188"><figcaption></figcaption></figure>
{% endtab %}

{% tab title="Step 5" %}
After the terminal is rebooted, select `RS-232` by pressing `3` in the `Connection type` menu

<figure><img src="/files/fLEaw1PGbEJVqAMf6bCL" alt="" width="188"><figcaption></figcaption></figure>
{% endtab %}

{% tab title="Step 6" %}
Select `SIM card` by pressing `3` in the `Financial host connectivity` menu.&#x20;

<figure><img src="/files/Gwxo6F0FbYWspb11qxtw" alt="" width="188"><figcaption></figcaption></figure>
{% endtab %}

{% tab title="Step 7" %}
Select `115200` by pressing `2` in the `Financial host connectivity` menu.&#x20;

<figure><img src="/files/td23FyAsz2mm7Ec9KFN1" alt="" width="188"><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}

5. **Gather necessary equipment**\
   All necessary equipment is listed below:&#x20;
   1. myPOS card (or another bank card)
   2. SmVend telemetry controller
   3. myPOS mini protective cover
   4. myPOS mini POS terminal
   5. myPOS micro USB power cable
   6. SmVend - myPOS DB9 cable
   7. &#x20;myPOS mini USB-RS232 cable

<figure><img src="/files/dua9sNIHTdKcpyXJbzFp" alt=""><figcaption></figcaption></figure>

6. **Connect to SmVend controller**

* Connect the micro USB power cable and the RS232 mini USB cable to the corresponding POS-terminal connectors. Connect the other end of the power cable to the USB port on the controller, or an external power source.&#x20;
* Put the POS terminal into a protective cover.

| <img src="/files/tPK8gvrem1o7Gc2vHsM5" alt="" data-size="original"> | <img src="/files/O47371iVyqXzC4l5HCBs" alt="" data-size="original"> |
| ------------------------------------------------------------------- | ------------------------------------------------------------------- |

* Connect myPOS mini USB RS232 cable to SmVend - myPOS DB9 cable.

<figure><img src="/files/jjBvg06G7HQS8P6RN7L2" alt="" width="563"><figcaption></figcaption></figure>

* Connect the second end of the SmVend - myPOS DB9 cable to the corresponding connector on the SmVend telemetry controller.

<figure><img src="/files/3KZpewWQoix8AZmi3jOw" alt="" width="375"><figcaption></figcaption></figure>

7. **Final setup with SmVend support**\
   Contact the SmVend support team for the final controller setup. In your request, indicate the currency you chose when activating the terminal. Technical support’s WhatsApp: **+371 28 701 129**


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://help.smvend.io/equipment-installation/pos-terminals/mypos/mini.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.