Jofemar

To connect your Jofemar coffee machine with the Coffee Mini telemetry controller, please use standard MDB scheme.

To connect you Jofemar coffee machine with the Smart Connector telemetry controller, please follow these steps:

1. Find the 12V power supply unit on the front panel (marked with a yellow circle)

2. Disconnect the wires currently connected to the power supply unit (indicated by an orange arrow)

3. Insert the SmVend cable between the disconnected wires (indicated by two orange arrows) to establish a parallel connection

4. Identify the two MDB ports on the machine (indicated by blue arrows)

5. Connect the MDB cable to either of the two MDB ports (blue arrows)

By following these steps, you will successfully connect the SmVend telemetry controller to your Jofemar coffee machine. If you encounter any issues, please contact customer support at [e-mail] for further assistance.